The standard 72-hour timeline starts after questionnaire submission; confirm the start point for designer-call bookings.

Home › Blog › Acrylic vs Laminate Kitchen Shutters: Cost Compared
All posts
Cost Guide Published Last updated

Acrylic vs Laminate Kitchen Shutters: Cost Compared

Compare acrylic and laminate kitchen shutter costs with a Hyderabad price example. See how the board, finish, edges and hardware affect your final quote.

Compare acrylic and laminate kitchen shutters using the same front area, substrate and inclusions. The finish upgrade should be visible as a separate cost rather than hidden inside a new whole-kitchen total.

The calculations below use hypothetical rates to explain the comparison, not current market prices.

How do you calculate the acrylic upgrade?

Suppose the same specified shutter board and inclusions are quoted at an illustrative ₹750 per sq ft with laminate and ₹1,300 per sq ft with acrylic. The difference is ₹550 per sq ft. Across 60 sq ft, that adds ₹33,000 before applicable taxes.

These invented rates demonstrate the method. Replace them with current written quotes for the exact products; list any change to board, side panels or fitting separately.

Which lines should change in the kitchen quote?

Ask the vendor to price both options against the same cabinet drawing. A one-line description such as “premium acrylic kitchen” leaves you guessing whether you are paying for a different surface, a different board or more finished panels.

Quote item What to compare
Shutters and drawer fronts List the selected brand, product code, finish, measured area and rate. Use the same number and size of fronts for both options.
Board inside each shutter Record the board type and thickness. If the acrylic option requires a different board, ask how much that adds.
Back face and edges Ask to see the inside face and edge of a finished sample door. Have the vendor specify what is included in each rate.
Visible side panels, fillers and loft fronts Mark every surface that will receive the matching finish. A tall unit beside the fridge may have an exposed side that adds to the bill.
Cabinet boxes and hardware Carry over the same cabinet-body specification, hinges, handles and drawer channels. Price any requested hardware upgrade on its own line.
Fitting, delivery and GST Check the inclusions on both quotes and compare the final payable totals.

How do you calculate the shutter area?

Measure the front width × front height of each door or drawer, then add the areas. For example, two shutters measuring 1.5 ft wide by 2 ft high contribute 6 sq ft in total. List exposed side panels separately so you can see what it costs to match them.

If a vendor quotes the kitchen per running foot, ask for the shutter area behind the acrylic upgrade. Two kitchens can have the same counter length, but one may have open shelves above the counter while the other has wall cabinets and a full loft. The amount of finish you are buying is different.

Can you use acrylic on upper cabinets and laminate below?

Yes. A mixed finish is worth pricing if the upper shutters are what you notice from the living or dining room. Using the illustrative rates above, here is what happens when 20 sq ft of a 60 sq ft kitchen gets acrylic.

Finish choice Calculation Shutter total before GST
Laminate throughout 60 × ₹750 ₹45,000
Acrylic on 20 sq ft of upper fronts, laminate on 40 sq ft below (20 × ₹1,300) + (40 × ₹750) ₹56,000
Acrylic throughout 60 × ₹1,300 ₹78,000

In this example, the upper-cabinet upgrade costs ₹11,000. That gives you a more useful design decision than choosing between two whole-kitchen price tags: Is the finish on that particular wall worth ₹11,000 to you?

Before deciding, stand the two samples upright together in your kitchen. Look at them in daylight and under the lights you use while cooking. If both are sold as white, check whether you like the colours side by side. Touch each sample near the handle position, where fingerprints are most likely to catch your eye.

Frequently asked questions

Does an acrylic kitchen also come with better hinges and drawers?

The finish name tells you about the visible surface. Check the hardware brand, model and quantity in the quotation. If the acrylic package also upgrades the drawer channels, ask for the hardware difference separately so you can decide whether you want both upgrades.

Can I compare an acrylic sheet price with a laminate shutter price?

First bring both prices to the same stage of manufacture. A sheet price covers the surface material. For a finished-door comparison, ask both vendors to include the board, front and back finishes, edge treatment and fabrication, then state fitting charges separately.

What should I send my carpenter to get comparable quotes?

Send the cabinet drawing with this request: “Please quote the same kitchen in two options, laminate and acrylic. Show the shutter area, finish code, board and thickness, back finish, edges, exposed panels, hardware, fitting, delivery and GST. Please itemise anything that changes between the two.”

Plan your next steps with Houspire

Use Houspire to explore design support for your room before committing to purchases. Confirm the selected package’s views, drawings, revisions and exclusions; have your execution team verify site measurements and construction details.

For related guidance, read kitchen planning mistakes and kitchen pricing units.