The standard 72-hour timeline starts after questionnaire submission; confirm the start point for designer-call bookings.

Home › Blog › Kitchen Cabinet Material Specifications: What to Check in a Quote
All posts
Cost Guide Published Last updated

Kitchen Cabinet Material Specifications: What to Check in a Quote

Use a sample kitchen cabinet quotation to check board grade, thickness, shutter finish, inner laminate, edges and hardware before comparing vendor prices.

Kitchen cabinet material specifications should identify each board, finish, edge and fitting. Two quotes for a “plywood kitchen” can cover different products and quantities.

Use this cabinet-level checklist to ask vendors for comparable prices before paying an advance.

What does a useful kitchen cabinet quotation look like?

Consider one two-door base cabinet at the end of a counter. It has one adjustable shelf, and its right side faces the dining area. An initial quote might describe it as “base cabinet, plywood with laminate, soft-close hinges, 1 unit.” Here is how to turn that line into a specification both vendors can price.

The dimensions and materials below are illustrative. Product codes and final specifications should be filled in from the actual selections before approval.

Cabinet part Example of what the quote should record Why it matters
Unit and dimensions B03 on kitchen drawing Rev 2. Quantity 1. Cabinet body 800 mm wide × 560 mm deep × 720 mm high, excluding legs, shutters and countertop. Both vendors can identify the same cabinet and see what the dimensions cover.
Cabinet body or carcass 18 mm BWP plywood for the two sides and bottom. Enter the manufacturer and product name. Describe the top rails separately. You can tell exactly which parts receive the quoted plywood grade.
Shelf One adjustable 18 mm plywood shelf, laminated on both faces, with its front edge finished. Include shelf supports. You know how many shelves you are buying and what you will see when the doors open.
Back panel 6 mm plywood back, with its grade, inward-facing finish and fixing method stated. The back has its own specification. A line describing the cabinet sides tells you little about it.
Shutters and outer finish Two 18 mm plywood shutters with 1 mm matte decorative laminate on the front. Enter the laminate brand, collection and shade code from the approved sample. “Matte beige” describes an appearance. The code identifies the product the vendor has priced.
Inner finish Record the liner laminate product, shade and thickness for the cabinet interior and shutter backs. Identify which faces it covers. You can check the finish behind an open door as well as the one visible when it is closed.
Shutter edges Colour-matched edge band on all four shutter edges. State the material, thickness and colour reference. A face sample shows the colour. A finished corner sample shows the line you will see around each door.
Exposed right side Dining-facing end finished in the selected outer laminate. State whether it is applied to the cabinet side or supplied as an additional panel. An additional panel affects the price and the finished width of the cabinet run.
Hardware and fitting Record the hinge brand, model and quantity, handle selection, shelf supports, legs and plinth. State which items and fitting charges are included. “Soft-close” describes how a hinge operates. The model and quantity let you compare what each vendor is supplying.

The vendor can still give one price for the complete unit. You do not need a separate price for every shelf support. You need a written description detailed enough for a second vendor to quote the same cabinet. That principle applies across the home in a bill of quantities (BOQ).

Which cabinet needs a separate specification?

Start with the sink cabinet. An ordinary storage cabinet and an under-sink unit can have the same width but different requirements. The sink, waste pipe, water connections and any filter affect how the inside can be used. Ask the vendor to identify the proposed board and grade, show the back-panel arrangement and pipe openings, and describe how cut edges will be treated. If the quotation includes an under-sink tray, record its size and check that it leaves access to the plumbing.

Then check the last cabinet in each run. Stand at the kitchen entrance and look towards the fridge, breakfast counter or open end of the platform. Mark every cabinet side you can see from there. A matching finish on that side is easy to agree on before manufacture and easy to miss in a quote based only on shutter area.

How do you compare two quotes when the board names match?

Suppose Vendor A quotes ₹19,000 for the example cabinet, including the finished right side and installation. Vendor B quotes ₹17,500, with the side panel at ₹1,200 extra and installation at ₹800 extra. On the same tax and delivery basis, Vendor B’s comparable total is ₹19,500. The cabinet that first appeared ₹1,500 cheaper is now ₹500 more expensive. These figures illustrate the calculation, rather than a market rate.

Before choosing, check the product codes, hardware and quantities against the same drawing revision. If a selected board or laminate is unavailable, ask the vendor to name the replacement, show the sample and state the price difference in writing before manufacture.

Frequently asked questions

Is “18 mm plywood with laminate” enough detail for a kitchen quote?

It is a starting point. Ask where the 18 mm plywood will be used, which grade and product the vendor has selected, and what they have allowed for the shelves, shutters and back panel. Then record the laminate on each visible face.

What sample should I ask for before approving kitchen shutters?

Ask for one finished shutter corner showing the outer face, edge band and inner face together. Hold it upright in your kitchen light and write the approved product and shade codes on the quotation. If a side panel must match, view its sample beside the shutter.

Can I send my carpenter a short request for an itemised quote?

Yes. Send the kitchen drawing with this message: Please quote each cabinet against the attached drawing. For the body, shelves, back and shutters, specify the board brand, grade and thickness. Include the outer and inner finish codes, edge treatment, exposed panels and hardware. Please show the quantity, unit price and final amount, with fitting, delivery, GST and exclusions clearly marked.

Plan your next steps with Houspire

Use Houspire to explore design support for your room before committing to purchases. Confirm the selected package’s views, drawings, revisions and exclusions; have your execution team verify site measurements and construction details.

For related guidance, read what a BOQ should contain and working with your own carpenter.